foxconn renaissance

[Lucker10]

1. Das Mainboard

Specification

Processor: Supports the newest Intel® CoreTM i7 and CoreTM i7 Extreme (Bloomfield) processors, Socket T (LGA1366)
Chipset: Intel® X58 + ICH10R Chipset

Front Side Bus: QPI 6.4GT/S

Memory: Triple DDR3 1600(**oc)/1333/1066x 6 DIMMs, Max.24GB

VGA on Die: Discreted

Expansion Slots: 4* PCIe2.0 x16, 1* PCIe2.0 x1, 1* PCI

IDE: 1* ATA 133

Serial ATA(SATA)/RAID: 6* SATAII + 2* eSATA w / RAID 0, 1, 5, 10; Intel® Matrix storage technology

Audio: Harp audio card with 6 audio jacks,CD-in and Front audio integrated

LAN: Gigabit LAN by Broadcom®5786

IEEE1394: 2*1394a

Back Panel I/O Ports:
1 x PS/2 keyboard port
1 x S/PDIF Coaxial out port
1 x S/PDIF Fiber out port
2 x eSATA ports
1 x Harp audio card with 6 audio jacks,CD-in and Front audio integrated
8 x USB 2.0 ports
1 x RJ45 LAN port
1 x 1394a port

Internal I/O Connectors: 1 x ATX 24-Pin power connector
1 x 8-pin ATX 12V power connector
1 x 4-pin CPU/System fan connector
3 x 3-pin Power fan connectors
3 x Onboard On/Off/CMOS Reset buttons
1 x Onboard power_LED
1 x IDE connector
1 x 1394a header
1 x HDA header
2 x USB 2.0 connectors support additional 4 ports
6 x Serial ATAII connectors
2 x SAS connectors
1 x Intruder Alarm header
1 x Front Panel header
1 x Speaker header
1 x IrDA header
1 x Buzzer

BIOS Features: Dual 8Mb flash EEPROM w/ LAN boot PnP, ACPI, WfM, DMI

Support CD: Drivers, Adobe Reader, Norton

Standards/Manageability: PCI 2.3, USB2.0, DMI 2.5

Special Features:

* Digital Life segment, based on Intel® X58 chipset

* 4* PCIe x16 Gen 2.0 with ATI CrossFireX™ & NVIDIA® SLI™ support

* Triple DDR3 1600(**oc)/1333/1066x 6 DIMMs, Max.24GB (Achieved by overclocking)
* Harp audio card with 6 audio jacks,CD-in and Front audio integrated with 110dB SNR
* Supports DTS CONNECT™ and Dolby Digital Live™ certification

* 100% SOLID Capacitor design and Ferrite Choke

Form Factor: ATX (12" x 9.6")

Bump: ach mist jetzt bin ich auf erstellen gekommen... bitte den threat nochmal löschen...

Bump: ach mist jetzt bin ich auf erstellen gekommen... bitte den threat nochmal löschen...

Bump: bitte löschen

Bump: bitte löschen