MoOnGo
Enthusiast
Hallo,
ich wollte mich ein wenig an OC heranwagen doch ich habe festgestellt das ich nicht alle einstellungen finde die ich brauche...
Hier zb aus dem Forum die einstellungen von einem mit nem DS3
"CAS Latency Time 5 [auto]
DRAM RAS# to CAS# Delay 5 [auto]
DRAM RAS# Precharge 5 [auto]
Precharge delay (tRAS) 18 [auto]
ACT to ACT Delay 3 [auto]
Rank Write To READ Delay 3 [auto]
Write To Precharge Delay 6 [auto]
Refresh to ACT Delay 42 [0]
Read to Precharge Delay 3 [auto]
Memory Performace Enhance [Normal]"
Diese Einstellungen zb gibts bei mir garnicht... Ist das normal ?
*edit*
bei mir siehts so aus (bild ist nicht von mir)
http://www.hardwareoc.hu/upload/articles/194_BIOS_CPU.jpg
hat jemand vielleicht ein tutorial extra für mein mainboard ?
ich wollte mich ein wenig an OC heranwagen doch ich habe festgestellt das ich nicht alle einstellungen finde die ich brauche...
Hier zb aus dem Forum die einstellungen von einem mit nem DS3
Robust Graphics Booster [Auto]
CPU Clock Ratio [6 X]
CPU Host Clock Control [Enabled]
CPU Host Frequency(Mhz) [430]
PCI Express Frequency(Mhz) [105]
C.I.A.2 [Disabled]
System Memory Multiplier [2.00]
Memory Frequency(Mhz) 860
High Speed DRAM DLL Settings [Option 1]
DRAM Timing Selectable [Manual]
CAS Latency Time 5 [auto]
DRAM RAS# to CAS# Delay 5 [auto]
DRAM RAS# Precharge 5 [auto]
Precharge delay (tRAS) 18 [auto]
ACT to ACT Delay 3 [auto]
Rank Write To READ Delay 3 [auto]
Write To Precharge Delay 6 [auto]
Refresh to ACT Delay 42 [0]
Read to Precharge Delay 3 [auto]
Memory Performace Enhance [Normal]
**** System Voltage NOT Optimized !! ****
System Voltage Control [Manual]
DIMM OverVoltage Control [+0.200V]
PCI-E OverVoltage Control [0.10]
(G)MCH OverVoltage Control [+0.10V]
FSB Voltage OverControl [+0.10V]
CPU Voltage Control [1.36250V]
Normal CPU Vcore 1.35000V
"CAS Latency Time 5 [auto]
DRAM RAS# to CAS# Delay 5 [auto]
DRAM RAS# Precharge 5 [auto]
Precharge delay (tRAS) 18 [auto]
ACT to ACT Delay 3 [auto]
Rank Write To READ Delay 3 [auto]
Write To Precharge Delay 6 [auto]
Refresh to ACT Delay 42 [0]
Read to Precharge Delay 3 [auto]
Memory Performace Enhance [Normal]"
Diese Einstellungen zb gibts bei mir garnicht... Ist das normal ?
*edit*
bei mir siehts so aus (bild ist nicht von mir)
http://www.hardwareoc.hu/upload/articles/194_BIOS_CPU.jpg
hat jemand vielleicht ein tutorial extra für mein mainboard ?
Zuletzt bearbeitet:
