Nero verhaut Rohlinge - bitte mal anschauen (mit Fehlerlog)

[DasRauchendeGnu]

Ich habe folgendes Problem.

Ich möchte gerne Daten auf eine DVD brennen.
Die Rohlinge sind DVD+R von Platinum.
Also habe ich wie gewohnt "Daten-DVD" ausgewählt und die Dateien hinzugefügt.
Nun sind dies 4438 MB, auf eine DVD passen laut Nero 4483 MB.

Also die knapp 50 MB Platz sind ja noch, zumal ich schon vorher manche Rohlinge recht gut ausgereizt hatte.

Nun erhalte ich folgendes Fehlerlog, wenn ich brennen will und der Rohling ist dahin. Ich hatte zuerst gedacht, ok, ein fehlerhafter Rohling kann ja mal sein, aber es ist leider gleich zweimal passiert.
Nicht über diese eine Zeile in der Mitte wundern, es lag zuerst kein Rohling drin, habe dann einen eingelegt, dann startete der Vorgang.

H4xx0r

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 18:35:34
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12c
(Nero Express)
Rekorder: <MATSHITA DVD-RAM UJ-840S>Version: 1.00 - HA 0 TA 1 - 6.6.0.12
Adapter-Treiber: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <MATSHITA DVD-RAM UJ-840S >Version: 1.00 - HA 0 TA 1 - 6.6.0.12
Adapter-Treiber: <atapi> HA 0

=== Scsi-Device-Map ===
DiskPeripheral : HTS721010G9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA DVD-RAM UJ-840S atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-840S D: CDRom0
LITE-ON DVDRW SOHW-1653S F: CDRom2
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095536kB)
Free physical memory: 1640MB (1679740kB)
Memory in use : 19 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.12.2005
ISO Zusammenstellung
14:40:39 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

14:40:40 #2 Text 0 File Reader.cpp, Line 127
Reader running

14:40:40 #3 Text 0 File Writer.cpp, Line 122
Writer MATSHITA DVD-RAM UJ-840S running

14:40:40 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

14:40:40 #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

14:41:16 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2272399 (504:58.49, 4438MB)

14:41:16 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

14:41:16 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: MATSHITA DVD-RAM UJ-840S, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R02, Product revision number: 3
Disc Application Code: 0, Extended Information Indicators: 3

14:41:16 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Not enough free discspace.
(Medium in drive: DVD+R. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-RAM; DVD+R DL.)

14:41:16 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2272400 (2272400) = #2272400/504:58.50
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2272400 blocks [MATSHITA DVD-RAM UJ-840S]
--------------------------------------------------------------

14:41:16 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [MATSHITA DVD-RAM UJ-840S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4653875200, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2272400 | lead-out | 1 | 0x41 | 0x00

14:41:16 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Cachen von Dateien

14:41:16 #13 Text 0 File Burncd.cpp, Line 4037
Cache writing successful.

14:41:16 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Cachen von Dateien fertig

14:41:16 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Start des Brennvorganges mit 8x (11.080 KB/s)

14:41:16 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:41:16 #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R02
Product revision number: 3
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 43 4F 48 - 4A 50 4E 52 30 32 03 38 ...RICOHJPNR02.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

14:41:16 #18 Text 0 File DVDPlusRW.cpp, Line 648
Start write address at LBA 0
DVD high compatibility mode: Yes

14:41:48 #19 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0B660000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00

14:41:48 #20 CDR -1128 File Writer.cpp, Line 311
Unbehebbarer Lesefehler

14:41:48 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

14:41:48 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

14:41:48 #23 SCSI -1106 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

14:41:48 #24 SCSI -1106 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

14:41:48 #25 Phase 127 File dlgbrnst.cpp, Line 1832
Erzeugen von DVD High-Kompatibilitätsgrenzen

14:41:48 #26 Phase 129 File dlgbrnst.cpp, Line 1832
Erzeugen der DVD Grenzen erfolgreich beendet

14:41:48 #27 Phase 38 File dlgbrnst.cpp, Line 1832
Brennvorgang nicht erfolgreich mit 8x (11.080 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03.08.2004 22:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

[CM50K]

was für rohlinge benutzt du?
nutzt du die schon länger oder das erste mal?

nero evtl. mal updaten, fw des brenners evtl. mal updaten, ansonsten mal einen anderen rohling-hersteller probieren...

 

[DasRauchendeGnu]

Ich dachte das Problem wäre aus der Welt...aber siehe da, schon wieder ein Rohling verhauen! Ich kann nur noch über meinen externen Brenner brennen.

FW ist wohl nicht das Problem, den bisher lief es ja wunderbar. Nero habe ich geupdatet, brachte auch nichts.

Die Rohlinge verwende ich schon eine ganze Weile, die Spindel ist bald leer und bisher sind auch alle problemlos durch diesen Brenner gegangen.

Hier noch ein Log, kann damit irgendjemand was anfangen? Was zum Teufel ist DRM Handling?

Habe auch irgendwie den Verdacht, das MatSHITa Laufwerke generell Müll sind! Mein Vater hat auch einen MatSHITa-Brenner im Notebook, das bockt auch oft herum.
So langsam habe ich den Verdacht, daß das Laufwerk eine Macke hat.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 18:35:34
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Programme\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b

Recorder: <MATSHITA DVD-RAM UJ-840S>Version: 1.00 - HA 0 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : HTS721010G9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA DVD-RAM UJ-840S atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-840S D: CDRom0
LITE-ON DVDRW SOHW-1653S F: CDRom1
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095536kB)
Free physical memory: 1646MB (1686372kB)
Memory in use : 19 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

22.12.2005
NeroAPI
16:15:59 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

16:15:59 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

16:15:59 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

16:15:59 #4 Text 0 File Reader.cpp, Line 127
Reader running

16:15:59 #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

16:15:59 #6 Text 0 File Writer.cpp, Line 122
Writer MATSHITA DVD-RAM UJ-840S running

16:15:59 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

16:15:59 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

16:15:59 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

16:15:59 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

16:15:59 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO

16:15:59 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: MATSHITA DVD-RAM UJ-840S, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R02, Product revision number: 3
Disc Application Code: 0, Extended Information Indicators: 3

16:15:59 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

16:15:59 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [MATSHITA DVD-RAM UJ-840S]
--------------------------------------------------------------

16:15:59 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [MATSHITA DVD-RAM UJ-840S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

16:16:00 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

16:16:00 #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

16:16:00 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

16:16:00 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11.080 KB/s)

16:16:00 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

16:16:00 #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R02
Product revision number: 3
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 43 4F 48 - 4A 50 4E 52 30 32 03 38 ...RICOHJPNR02.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

16:16:00 #22 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes

16:16:10 #23 SCSI -400 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x01F80000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x38 0x00 0x00 0x03 0x01

16:16:10 #24 CDR -400 File Writer.cpp, Line 311
Unspecified target error

16:16:10 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

16:16:10 #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

16:16:20 #27 SCSI -400 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x032E5E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x01
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x38 0x03 0x07 0x03 0x01

16:16:20 #28 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders

16:16:20 #29 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully

16:16:20 #30 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11.080 KB/s)

16:16:20 #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

16:16:20 #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)