Suchergebnisse

https://www.3dmark.com/sn/9039480 Ok best so far...pretty minor adjustments in linux 448w PL +25mv gpu core +50mv vram +25mv vccdi 1.50 multiplier for TDC I hit the PL easily...so gonna add a bit more to it. Behaviour i noticed i had to drop the undervolt slider a bit -95 vs -105 or it would...

Ok all...what do i need before running this script? Downloads etc Balls of steel? 😅

Ok! Nice....will keep that in mind when im at the end....gonna muck around with linux today and hook up the chiller...just to keep temps in check.with the weather/humdity here...quite low atm...i can probably get the water down to like 9/10c,a couple of c above dew point...will stuff around like...

Ok! Oh i meant with just resetting the driver...does it help with the broken driver? Or its that broken it needs a reinstall.... Sounds tedious...but eh no pain...no minimal gain? 😆😆😆

https://www.3dmark.com/sn/8950108 Only SN so far....this is pretty much the limit for me stock card oc....just custom water loop so far...water temp was around 25c its getting warm here. +300mhz core --105mv 2830 mem +10PL 1759598348 So lots of driver reinstalls? Or does CRU help at all...

Hmmm so cooling isn't really the problem with this gen...the max clocks are at the ragged edge for the gpu itself! Ok eh it wont hurt to try...or will it 😅😅

Hmmmm well im gonna get to that limit....havent yet! And see what scores i can get out of it....just had a look at the linux link...and here i am thinking i only needed it to flash bioses...now its the new MPT just a bit more confusing! 😅😅...i have a live usb version of ubuntu looking at me but...

Hey everyone!! Im back!😃...picked up a sapphire nitro plus 9070xt....not happy about the power connector...bit worried actually...not now...when I hook up the evc! Wonder if the taichi bios would work on it 😅 Got an alphacool core block on it and some conductonaut extreme/upsirin thermal pads...

Also...with MCT voltage...you dont just leave that on max? You muck around with it on there also?

Ah yes im aware that evc is an offset...thats how i obtained the 1 45v 😆...1.35v in mpt then offset higher with evc...at those volts temps were still great...50s hotspot and around 15c core...hit 700w total gpu power in those runs....... also with evc...if i tried adding huge offsets to get...

Are you suggesting that volts may be too low here? ...even when im running time spy it seems there is a lot of droop...have def seen under 1.3v in the section im talking about

Heya mate!! Yes i see...points were still going up with the clock increases...but the start of gt2 i always get the crash.....when checking time spy afterward it has crashed up near 3100mhz...so is some type of overboosting happening? .... If i drop those clocks...my points drop straight...

So that best run of mine ..quite dont understand...clocks are great...like 3040mhz average...mem clock etc but shouldnt the score reflect that more? I mean compared to other peoples clocks/scores....should i be looking elsewhere.... Its a stripped down os/ tweaks made to appearance settings etc...

Or just wait for the snow again? And throw it outside? 😃 i was surprised with the memory clock but like i said i was still getting improvements up until 2500..i think effective was like 2470 or something...no errors etc.. With fclk i may raise the other 2 clocks a bit..the min/boost one....

Here you go.. fclk seems to be my max....anymore and i get a black screen mid run....not sure if there is anything i can tweak to get that higher? Soc clock pretty much maxxed...any higher than that i lose points..... Maybe something hidden in there to squeeze more points...not sure Anything...

TY will post them up for you soon

https://www.3dmark.com/spy/57021113 Cracked 28000....this is with temp/vmin....1.35v Couldnt get close with the evc...i think i still need some practice with it..... At -18c i was still getting score improvements with mem up to 2500mhz/FT2

👀 Bit of a juggling act with the evc and adding clock speed in mct..as voltage increase also increases core clock...so far with the evc thought it crashes right at the start of Gt2....where as in software voltage increase i could get higher clocks..3040mhz and it would pass.... So there is a lot...

I have a work around...using osd and full screen...now i have another issue...after using mpt and restarting driver i get a no compatible adapter error with mct! It never ends 😆😆