Suchergebnisse

No cover for me. I like the stainless, and the D5 next. This photo is from mock-up

That is ok. Tap the 12v and ground wires going to the quadro for power, then run your pwm to the quadro.

Mora tinkering is underway.

The optimus product quality is second to none in my book.

A. Thin flat head screw driver between the round case and the cap, it should pop right off.

So you need the paint out of the passages. I. would soak it in paint stripper, and recoat just the outside. This is really the best way and does not damage the brass at all.

thesis ports aren't screwed in like ek. They are brazed. I was able to fix it by cleaning paint, using a torch and silver solder, but I just junked it after that. Was only $30.

The bykski radiator - the only radiator ive ever had leak ...

For me, I already had much of the stuff. You're right that I could mount a quadro, but the D5 suits me better with pwm control of the fans, and coolant temp without another fitting. I. Did buy the high flow also because of the temp sensor and flow meter. I originally had the high flow in the...

I. may be misunderstanding you... im sorry if thats so. I have control of both because of a hubby 7 mounted at the mora.

I think we have Discussed this once before ...? I. use usb to control the d5, and the d5 controls the 8x nfa20 via pwm. the usb allows many devices to be used on the mora... so now i am piecing together a dual d5 for the front..

The high flow next has been moved out to the mora. A hubby is behind one side cover to share usb data for the highflow and d5 next.

I missed the acrylic and struggled with decoupling the previous DDC alphacool top.

The Mora now holds the PC... : LOL:

Out with the apogee and in with the sig v2 ...

ITX case, sub 20l, with 2x 280mm radiators (not including mora :-) )...

Yes! I've had three of these tops with peeling paint. On the fourth, I stripped the paint: ... and then powder coated just the outside ...

New case finally arrived, which means I can actually use the apogee ... but it gets changed out very soon. The replacement:

Would it make a difference since this piece appears that it can be rotated?

Don't follow me too closely, it will get expensive. lol