Aktueller Inhalt von Hemu2K

@Veii whats the ideal SVID mode in bios? There's auto, Intel fail safe, typical, best case, trained.

Like you said IA etc I have no clue what you meant. SA "side issue" ODT around, I didn't get what you meant to say there

I didn't understand anything you said😢

@tibcsi0407 how do you verify if you need more SA or less, like I'm at 1.145V but I don't know if that's enough or not. How can I tell

@Veii SA is 1.145 when should I increase it, how can I tell I need more SA?

I'll be getting KS soon, all my testing on this chip will be🫡 for something I guess, could call it experience

@tibcsi0407 can you please share Asus OC tool and the tm5 coolCMD that veii is talking about.

@Veii So I have some questions 1: if I use Asus OC tool, should I undervolt the 6GHz VF point along with 5.6 and 5.8? I know I can't offset beyond lower VF point that's why I have 160mV headroom at 5.6 and 40mV at 5.8 point. For 6.0 it's 1.458V from 5.8 1.388 so a bigger gap 2: 1.25V tx and...

@Veii Here's my exact settings in bios Core clocks/Ring: all auto VF offset page, 5.6 offset 80mV 5.8 20mV That's all I did to core nothing else. Ram Mode: auto Freq: 8000 Timings 8000 36-48-48-48-64 8/8/32 rrd/tfaw. 12 trtp Trefi 65535, terts, 16/8 20/20 16/8 68/54 Voltages: 1.54/1.49(dimms...

Okay so just to be clear you wanted me to start at 200mV gap and keep increasing the delta and further lower my tx? Also what's a solid core test as per you, and how long should I run the core test to confirm rock solid core stability.

So 1.29tx and 1.49memDQ vdd 1.54 at 8000 36-48-48 Insta BDOD, went up to tx1.31 vt3 fail. 1.32 tx also failed. How far should i keep increasing TX?

My CPU is running very low clockspeed under load and not able to hit 5.7 at all if use less than 400A, I'm on AIO cooling with Hyperthreading disabled. Edit: this is with VF tuned

Ok so I'm not on mdie anymore. I have 2x16 Adie 6000c30 teamgroup. Are the dimm voltage still the same? Also my timings are 8000 36-48-48-60 rn it's 1.53/1.4.

@Veii hello again, while starting ram OC can you give me some pointers to.keep in mind, is SA and CPU tx related? If so what's the delta or range I should set them. And mem vdd/vddq delay I saw your post months ago saying mem delta depends on tx or SA I can't remember. Anyway can you explain...

Hey man, does mc SP mean anything in general? I have mine at 88-89, does this mean anything regarding voltages, SA or imc? What is your experience with this parameter.