RockOn
Semiprofi
Thread Starter
- Mitglied seit
- 07.12.2004
- Beiträge
- 1.156
Hy,
Ich suche stabile bios einstellungen für OCZ EB DDR PC-4000 2x1024MB Platinum Edition ( OCZ5002048EBPE-K ), für dfi nf4 sli-dr ( siehe sig ).
Und ein gutes bzw bestes bios.
ERLEDIGT 1) ein tip für ein OCZ optimiertes bios!
Download: 704-2BTA
Mirrow: 704-2BTA
Aktueller Thread: LINK
ERLEDIGT 2). Bios einstellungen
Genie BIOS Settings:
FSB Bus Frequency............................. - 265
DRAM Configuration Settings:
DRAM Frequency Set............................ - 200=RAM/FSB:01/01
Command Per Clock (CPC)....................... - Enable
CAS Latency Control (Tcl)..................... - 3.0
RAS# to CAS# delay (Trcd)..................... - 03 Bus Clocks
Min RAS# active time (Tras)................... - 07 Bus Clocks
Row precharge time (Trp)...................... - 02 Bus Clocks
Row Cycle time (Trc).......................... - 07 Bus Clocks
Row refresh cyc time (Trfc)................... - 14 Bus Clocks
Row to Row delay (Trrd)....................... - 02 Bus Clocks
Write recovery time (Twr)..................... - 02 Bus Clocks
Write to Read delay (Twtr).................... - 02 Bus Clocks
Read to Write delay (Trwt).................... - 03 Bus Clocks
Refresh Period (Tref)......................... - 4708 Cycles
DRAM Bank Interleave.......................... - Enabled
DQS Skew Control.............................. - Auto
DQS Skew Value................................ - 0
DRAM Drive Strength........................... - Level 7
DRAM Data Drive Strength...................... - Level 2
Max Async Latency............................. - Auto
DRAM Response Time............................ - Normal
Read Preamble Time............................ - Auto
IdleCycle Limit............................... - 256 Cycles
Dynamic Counter............................... - Disable
R/W Queue Bypass.............................. - 16 x
Bypass Max.................................... - 07 x
32 Byte Granularity........................... - Disable(4 Bursts)
Quelle: DFI Forum, speziell von dfi getestet!
PS: mit google und sufu nicht das passende gefunden.
Ich suche stabile bios einstellungen für OCZ EB DDR PC-4000 2x1024MB Platinum Edition ( OCZ5002048EBPE-K ), für dfi nf4 sli-dr ( siehe sig ).
Und ein gutes bzw bestes bios.
ERLEDIGT 1) ein tip für ein OCZ optimiertes bios!
Download: 704-2BTA
Mirrow: 704-2BTA
Aktueller Thread: LINK
ERLEDIGT 2). Bios einstellungen
Genie BIOS Settings:
FSB Bus Frequency............................. - 265
DRAM Configuration Settings:
DRAM Frequency Set............................ - 200=RAM/FSB:01/01
Command Per Clock (CPC)....................... - Enable
CAS Latency Control (Tcl)..................... - 3.0
RAS# to CAS# delay (Trcd)..................... - 03 Bus Clocks
Min RAS# active time (Tras)................... - 07 Bus Clocks
Row precharge time (Trp)...................... - 02 Bus Clocks
Row Cycle time (Trc).......................... - 07 Bus Clocks
Row refresh cyc time (Trfc)................... - 14 Bus Clocks
Row to Row delay (Trrd)....................... - 02 Bus Clocks
Write recovery time (Twr)..................... - 02 Bus Clocks
Write to Read delay (Twtr).................... - 02 Bus Clocks
Read to Write delay (Trwt).................... - 03 Bus Clocks
Refresh Period (Tref)......................... - 4708 Cycles
DRAM Bank Interleave.......................... - Enabled
DQS Skew Control.............................. - Auto
DQS Skew Value................................ - 0
DRAM Drive Strength........................... - Level 7
DRAM Data Drive Strength...................... - Level 2
Max Async Latency............................. - Auto
DRAM Response Time............................ - Normal
Read Preamble Time............................ - Auto
IdleCycle Limit............................... - 256 Cycles
Dynamic Counter............................... - Disable
R/W Queue Bypass.............................. - 16 x
Bypass Max.................................... - 07 x
32 Byte Granularity........................... - Disable(4 Bursts)
Quelle: DFI Forum, speziell von dfi getestet!
PS: mit google und sufu nicht das passende gefunden.
Zuletzt bearbeitet:
