Hi Leute habe oben genanntest Notebook mit nem Penitum M Dothan 1500MHz.Würde dem gerne mal paar MHz mehr geben, bloß finde ich kein Tool dafür
Setfsb funktioniert bei mir nicht. Was für Tools gibt es um ne Centrino Plattform in Windows zu übertakten ?
+ Antworten
Ergebnis 1 bis 25 von 31
Thema: Ocen von Samsung P35
- 18.05.06, 09:48 #1
- 18.05.06, 09:54 #2
sieht doch herrlich nach nem pinmod aus, gabs hier schon im forum, du hast einen alten pentium m mit 100 mhz fsb. diesen kannst du auf 133 jumpern und hast somit 15x133=1955 mhz und dies wird zu 100% stabil sein ! such mal nach pinmod dothan dann wirst du was finden
Audi A 5 3.0 TDI S-Line
Macbook 13,3" Unibody Early 2009
HTC Touch Diamond Pro
- 18.05.06, 10:03 #3
- 18.05.06, 10:24 #4
ne da kann man wenn man es richtig macht nichts kaputt gehen, du nimmst ein draht und jumperst das dingen von 100 auf 133 und somit läuft er anstatt 15x100 mit 15x133 ! die genau anleitung findest du hier z.B bei Luhri oder bei google
Audi A 5 3.0 TDI S-Line
Macbook 13,3" Unibody Early 2009
HTC Touch Diamond Pro
- 18.05.06, 10:27 #5
- 18.05.06, 10:35 #6
funzt bei jedem Dothan, pn an luhri
Audi A 5 3.0 TDI S-Line
Macbook 13,3" Unibody Early 2009
HTC Touch Diamond Pro
- 18.05.06, 10:59 #7
- 18.05.06, 11:09 #8
oder schau mal bei
http://www.notebookforums.com/showthread.php?t=80879

mfgi5 2500K | Z68 pro3-m | 580GTX | SFX 450W[Still Testing]
Origin: AManAlone
- 18.05.06, 11:14 #9
was nimmt man dafür eigentlich ? nen dünnen kupfer draht ? Und passt danach die CPU überhaupt noch in den Sockel wenn da doch der Draht drinsteckt ?
Noch ne Frage hat jemand ne Ahnun wie ich Clockgen mit dem P35 zum Laufen bekomme ? würde nur gerne mal bissle rumtesten, aber leider kann ich den takt mit clockgen nicht erhöhen keine Ahnung warum
- 18.05.06, 11:18 #10
Das werde ich heute wohl testen, wenn du willst werde ich ein paar bilder posten
i5 2500K | Z68 pro3-m | 580GTX | SFX 450W[Still Testing]
Origin: AManAlone
- 18.05.06, 11:20 #11
- 18.05.06, 11:21 #12
das geht mit jedem notebook auf i915 basis
i5 2500K | Z68 pro3-m | 580GTX | SFX 450W[Still Testing]
Origin: AManAlone
- 18.05.06, 11:26 #13
- 18.05.06, 11:36 #14
schau mal mit everest nach was für einen chipsatz du hast
i5 2500K | Z68 pro3-m | 580GTX | SFX 450W[Still Testing]
Origin: AManAlone
- 18.05.06, 11:49 #15
- 18.05.06, 12:24 #16
ich glaube nicht .. mein mod hat funktioniert. / habe nur die bilder vergessen
aus einem 1400mhz cpu wurde eine 1833mhz cpui5 2500K | Z68 pro3-m | 580GTX | SFX 450W[Still Testing]
Origin: AManAlone
- 18.05.06, 13:33 #17
- 18.05.06, 13:38 #18
mann kann sich auch selber informieren bevor du andere angrummelst.
also wenn du einen 915er chipsatz hast geht es wenn nciht geht es nicht.
Bei mir hat der umbau gerade geklappt. ich habe einen kleinen strang eines alten lüfter kebels genommen und es läuft gerade sehr gut.i5 2500K | Z68 pro3-m | 580GTX | SFX 450W[Still Testing]
Origin: AManAlone
- 18.05.06, 13:39 #19
- 18.05.06, 13:41 #20
ích such gerade für dich raus ob es auch mit dem 855er geht.
http://www2.ijib.com:1337/phpbb/viewtopic.php?t=3
mehr habe ich nicht gefundenGeändert von Pulse (18.05.06 um 13:45 Uhr)
i5 2500K | Z68 pro3-m | 580GTX | SFX 450W[Still Testing]
Origin: AManAlone
- 18.05.06, 13:45 #21
- 18.05.06, 13:47 #22
I tried this with a 855 Chipset, unfortently, It went wrong (I thought it was a 915 honest) and now have a dead laptop.
I'm never touching an Overclock on a laptop ever again!
lass das lieber!i5 2500K | Z68 pro3-m | 580GTX | SFX 450W[Still Testing]
Origin: AManAlone
- 18.05.06, 13:48 #23
- 18.05.06, 13:55 #24
das wird 100%ig nichts tut mir leid für dichOverclocking the i855.
The Intel 855 does not support 133Mhz, but the PLL chip it uses does.
Simply because a chipset does not support a speed does not mean the chipset can not run at that speed.
If you replace the PLL chip with one that allows adjustment, you can run the 855 chipset at 133MHz, but run into problems with the overclocked bus, and lose audio. This is not a problem for those that use PCMCIA card or USB audio cards.
But the chip and motherboard have settings for 133MHz FSB.
i855 PLL chip ICS 950810 Pins 54 and 55 determine CPU FSB speed.
Currently set at 54 = is High, and 55 = Low (ground), which equals 100MHz.
If it is set at 54 = High and 55 = High, then it would be set at 133MHz CPU.
So, if we lifted IC leg 55 off ground, then jumpered it to pin leg 54..............
I have tried modding the PLL chip, but after breaking a leg off, gave up.i5 2500K | Z68 pro3-m | 580GTX | SFX 450W[Still Testing]
Origin: AManAlone
- 18.05.06, 14:20 #25

LinkBack URL
About LinkBacks
Zitieren

